LOW LOSS MICROWAVE COAXIAL CABLES
W83 Low loss and phase stabe cable
Test Table low permittivity for RF High-frequency testing
EPS35 Foam test Table is a simple, inexpensive solution for your EMI testing! It is made from durable, expanded polystyrene (EPS) material and can be customized to your requirements. The assembled dimensions are: 1,5x1x0,8Mt. with 15cm thickness / optional central feet for overloading more than 50Kg. up to 150Kg.
- Easy to assemble and transport
- working Surface Protection from scratches (gray)
- fully transparent at Radio frequencies
- Doesn’t interfere with the emission and immunity test
- Developed to resist a heavy load
- Applications: Complies with CISPR, ISO , & IEC requirements for having a low permittivity and can be used for additional standards
- low permittivity: >1,04
- Special customized dimensions available on demand
- Dimensions of the kit: 150x100x30cm. Weight: 20Kg. Colour: White, protection: Grey
your indispensable accessory in shielded rooms, anechoic, reverberant, and large GTEM chambers!.
RF Clamp calibrator
Calibration fixture: Compatible with EMCO, SINGER, PEARSON, ETS., FISCHER, COM-POWER…. clamps
Coaxial Cells for shielding effectiveness test
Fiber-optics Feed-through
Feedthrough 3 couples fiber optics
Technical Panels
FILTERS
The filter housings are RF-tight fully shielded and resin-filled.
– power line filters up to 1000 V, 2000 A, for DC, 50, 60, 400 Hz
– Control line filters for 24 – 250 V, 0,1 – 10 A, up to 32 lines / filter
– Telephone- and data line filters 24 – 250 V, 0,1 – 1 A, up to 32 lines / filters
– Customized models upon request
Multimedia Filter
S H I E L D I N G M A T E R I A L
GTEMCELL Ltda will supply you with all products necessary for a safe shielding, e.g.
– RF doors
– waveguides
– dust filters
– Honeycomb – Specification
– shielded windows
– cables shielding
– EMI-shielding of electrical enclosures
– finger contact stripes
– waveguide gaskets
– connector gaskets
– conductive elastomeric
– conductive adhesives and coatings
Volume resistivity test fixture
Volume resistivity test set-up, Electrodes
Electrodes 1″ and 1/2″ size
New electrodes by GTEMCELL according to MIL-G-83528: method of measuring volume resistivity of finished parts.
TEST FIXTURE
Conical metal housing for self-ballasted lamps, energy-saving lamps, for E24, E27 sockets, and Bajonet according to Fig.7 CISPR 15 – EN 55015
SPECIAL EQUIPMENT
Contact us for more info.